Direct answer
On a supported LG washer, FE means the washer detected an overfill condition. Turn off both water faucets if water continues to enter and cancel the cycle. Then check for excessive suds and confirm the drain path is not siphoning or blocked.
What this covers
- LG washers displaying FE
- The code and product type exactly match the official source
- Customer-accessible checks before component replacement
What it does not cover
- ×A similar code on another manufacturer or appliance type
- ×Codes omitted from the exact model manual
- ×Internal wiring, sealed-panel or live-electrical repair
Confirm FE on the exact model
ReversiblePhotograph the complete display, record the model tag and note the cycle stage. Similar-looking codes can mean different things on another product line.
Check the condition named by the code
ReversibleTurn off both water faucets if water continues to enter and cancel the cycle.
Correct the remaining user-serviceable cause
ReversibleCheck for excessive suds and confirm the drain path is not siphoning or blocked.
Run one controlled verification
ReversibleAfter water is controlled, restore power once and observe an empty fill. Keep water off and request service if filling continues while the washer is off.
Evidence ledger
Sources behind this answer
Visible sources support the visible claims. Home Product Support records the publisher, the fact used and the review date; community reports can suggest an issue but do not become a published fact on their own.
Exact questions
Common follow-ups
What does FE mean on a LG washer?+
It means the washer detected an overfill condition.
Can I clear FE by resetting the washer?+
A restart may clear a stored display only after the underlying condition is corrected. Repeatedly resetting without correcting the cause is not a repair.
When is professional service appropriate?+
Keep water off and request service if filling continues while the washer is off.
Answer for the exact device and software version shown above.