Home Product SupportIdentify a code

GE microwave oven · exact code

GE microwave oven code Probe: meaning and exact next steps

Probe means GE defines this display as an open temperature probe, or a probe that is not plugged in during a temperature-cook function. This answer applies only to GE and GE Profile microwave ovens with electronic controls. GE states these fault codes are programmed into all microwave oven controls; availability of any one code varies by model.

Direct answer

On the covered GE microwave oven, Probe means GE defines this display as an open temperature probe, or a probe that is not plugged in during a temperature-cook function. First, make sure the probe is firmly inserted both into the cavity wall jack and into the food.

Definition versus diagnosis

The display names a detected condition—not an automatically failed part.

KnownThe exact manufacturer definition and operating state shown above.Not yet provenA replacement component, wiring fault or internal cause without controlled isolation.Next evidenceThe first safe observation or test in the ordered checklist below.

What this covers

  • GE microwave oven covered by the cited source
  • Displayed code or documented alias: Probe
  • The exact operating state described by the manufacturer

What it does not cover

  • ×Another product type or original-manufacturer platform
  • ×A visually similar but different code
  • ×Internal live electrical, sealed-system, gas, battery-cell or control-board repair
Try in this order0 of 4 completed

  1. Match every character and the exact product

    Reversible

    Photograph the complete display and product label. This record covers Probe on GE and GE Profile microwave ovens with electronic controls. GE states these fault codes are programmed into all microwave oven controls; availability of any one code varies by model.

  2. Preserve the failure state

    Reversible

    Make sure the probe is firmly inserted both into the cavity wall jack and into the food. Record the operating stage, recent change and what still works before clearing the message.

  3. Correct only the documented fault domain

    Reversible

    Reseat the probe fully at both ends and restart the temperature-cook function; a probe that still reads open is a service item. Do not borrow a reset or meaning from a similar code, product or model year.

  4. Verify once, then respect the service boundary

    Reversible

    Repeat only the shortest safe action that reaches the original stage. If Probe returns, stop repeated resets and use model-specific manufacturer support.

Evidence ledger

Sources behind this answer

Visible sources support the visible claims. Home Product Support records the publisher, the fact used and the review date; community reports can suggest an issue but do not become a published fact on their own.

01
GE AppliancesMicrowave — error, fault or function codes

Official GE microwave fault-code table with GE's own definitions.

Exact questions

Common follow-ups

What does Probe mean on a GE microwave oven?+

GE defines this display as an open temperature probe, or a probe that is not plugged in during a temperature-cook function.

Can I reset Probe without fixing the cause?+

A reset may hide the display temporarily but does not correct the documented fault. Record the code and complete only the safe checks first.

Why is the complete model number required?+

Manufacturers reuse characters across platforms. The model number determines which official table, controls and service boundary apply.

When should I stop?+

If the display persists with a correctly seated probe, the probe or its circuit has failed.

Change recordAug. 17, 2026 — Added from the cited first-party GE code reference with explicit product scope and stop conditions.
Report a correction
Wrong device or version?

Match the path before repeating the steps.

Match another device