Direct answer
On the covered Maytag dryer, F4 E3 means Maytag states the lint screen or vent is clogged; the vent may be crushed, kinked or blocked. First, clean the lint screen and inspect the full vent run to the outside.
Definition versus diagnosis
The display names a detected condition—not an automatically failed part.
What this covers
- Maytag dryer covered by the cited source
- Displayed code or documented alias: F4 E3
- The exact operating state described by the manufacturer
What it does not cover
- ×Another product type or original-manufacturer platform
- ×A visually similar but different code
- ×Internal live electrical, sealed-system, gas, battery-cell or control-board repair
Match every character and the exact product
ReversiblePhotograph the complete display and product label. This record covers F4 E3 on Maytag electronic-control dryers. Code availability varies by model and fuel type; a gas and an electric dryer of the same series do not display the same set of codes.
Preserve the failure state
ReversibleClean the lint screen and inspect the full vent run to the outside. Record the operating stage, recent change and what still works before clearing the message.
Correct only the documented fault domain
ReversibleClear the restriction; a blocked vent is a fire risk, so do not keep running the dryer with the code present. Maytag documents these checks for this code: is the Lint Screen or Vent Clogged; and does the home venting line need to be cleaned or tested. Work them in that order and correct only what you actually find.
Verify once, then respect the service boundary
ReversibleRepeat only the shortest safe action that reaches the original stage. If F4 E3 returns, stop repeated resets and use model-specific manufacturer support.
Evidence ledger
Sources behind this answer
Visible sources support the visible claims. Home Product Support records the publisher, the fact used and the review date; community reports can suggest an issue but do not become a published fact on their own.
Exact questions
Common follow-ups
What does F4 E3 mean on a Maytag dryer?+
Maytag states the lint screen or vent is clogged; the vent may be crushed, kinked or blocked.
Can I reset F4 E3 without fixing the cause?+
A reset may hide the display temporarily but does not correct the documented fault. Record the code and complete only the safe checks first.
Why is the complete model number required?+
Manufacturers reuse characters across platforms. The model number determines which official table, controls and service boundary apply.
When should I stop?+
Stop for smoke, arcing, burning odor, uncontrolled water, gas odor, battery swelling, extreme heat or any condition the manufacturer directs to professional service.
Answer for the exact device and software version shown above.