Direct answer
For the Canon Color imageCLASS MF656Cdw, prove the printer can print internally before repairing the network or computer queue. First, print a configuration/status page from the printer panel.
What this covers
- Canon Color imageCLASS MF656Cdw (5158C002)
- Canon printer; PIXMA/MegaTank/MAXIFY/imageCLASS ink/toner systems and maintenance paths differ.
- The specific fault this record addresses: is offline or unavailable
What it does not cover
- ×The same symptom on a different Canon product line, which has its own record and its own cited source
- ×An on-screen error code whose meaning has not been checked against this exact model's manual
- ×Live electrical, gas, sealed-system, internal battery-cell or structural repair — a technician boundary, not a self-service step
Differential
What actually causes this, and how to tell them apart
These are ordered by how often each one is the answer, not by how easy it is to try. The point of the middle column is that two causes producing the same headline symptom rarely produce the same detail — that detail is what tells you which one you have before you change anything.
- 1
The printer's IP address changed
What separates it The printer works from a phone or from its own control panel but the computer shows it offline, often after a router restart or a power cut.
How to confirm Print the network configuration page from the printer's own menu and compare its address against the one the computer's printer entry is using. Assigning the printer a fixed address in the router prevents this recurring.
- 2
Use Printer Offline was set manually
What separates it The queue shows offline with the printer demonstrably on the network.
How to confirm Windows has an explicit offline setting that latches and does not clear itself. It is set automatically after a failure and then never reset.
- 3
The print queue has jammed on a stuck job
What separates it Nothing prints, jobs accumulate, and the first job cannot be cancelled.
How to confirm Clear the queue entirely, and restart the print spooler service if jobs will not delete. A single corrupt job blocks everything behind it.
- 4
The computer and printer are on different networks
What separates it The printer is on a guest network, or on 2.4 GHz while the computer is on a separate 5 GHz network the router treats as isolated.
How to confirm Both must be on the same network segment, and guest networks generally prevent device-to-device communication entirely.
- 5
The printer is asleep and slow to wake
What separates it The first job of the day fails and subsequent ones work.
How to confirm Deep sleep can drop the network connection until the printer wakes. The sleep timer is usually adjustable.
- 6
A duplicate printer entry is installed
What separates it Several similar printers listed on the computer, with jobs going to a copy that no longer exists.
How to confirm Remove all copies and add the printer once.
Before you touch a setting
Record this first — changing settings destroys the evidence
Every item below stops existing the moment a reset, re-pair or settings change is made. Written down first, they are what separates the causes above; recovered afterwards, they are guesswork.
- Whether the printer can print its own configuration or test page from its control panel — that separates the printer from the network and the computer in one step.
- The printer's current IP address from that page, compared with what the computer is using.
- Whether it also fails from a phone, which would point at the printer or network rather than the computer.
- Whether a router restart or power cut preceded it.
Print a configuration or test page from the printer's own control panel
ReversibleIf that works, the printer and its hardware are fine and the problem is the network or the computer's queue.
Compare the printer's actual IP address with the one the computer has stored
ReversibleA changed address is the most common cause, and assigning a fixed address in the router prevents it recurring.
Clear the print queue and uncheck Use Printer Offline
ReversibleThat setting latches after a failure and does not clear itself.
Confirm both devices are on the same network and not a guest network
ReversibleGuest networks generally block device-to-device communication entirely.
Remove duplicate printer entries and add the printer once
ReversibleJobs sent to a stale copy simply disappear.
Model-specific
What is true of this model and not of its siblings
Generic advice for the product line fails here. Each item below is a property of this specific model family that changes which of the steps above apply to you.
- Model scope
- 5158C002. Canon printer; PIXMA/MegaTank/MAXIFY/imageCLASS ink/toner systems and maintenance paths differ.
- Type — COLOR LASER all-in-one (toner)
- A colour laser AIO (print/scan/copy/fax, duplex, wireless). LASER uses toner, not ink, so it does NOT clog from disuse and is fast and low-cost for text/office colour — faded print is usually low/unseated toner, not a clog.
- Toner & drum
- Streaks/spots are usually a toner cartridge or drum issue; repeating marks at a fixed interval point to the imaging drum. Replace toner when prompted; genuine Canon toner is recommended.
- Connectivity
- Wi-Fi/Ethernet/USB; 'offline' is usually a network/queue issue.
- Symptom boundary
- This record covers Canon Color imageCLASS MF656Cdw when it is offline or unavailable. A different symptom on the same hardware, or this symptom on a different Canon product line, has its own record with its own causes and its own cited source.
Stop boundary
When this stops being a self-service repair
Continuing past any one of these costs more than the repair saves — in safety, in warranty, or in evidence a technician needs.
- !Do not weaken router security or disable its firewall to make a printer reachable.
Evidence ledger
Sources behind this answer
Visible sources support the visible claims. Home Product Support records the publisher, the fact used and the review date; community reports can suggest an issue but do not become a published fact on their own.
Where the manufacturer's article stops. Canon publishes this as "Resolve Printer is Offline Or Not Responding - Windows". Canon's own offline/not-responding sequence: power and panel, correct queue, power-cycle, Wi-Fi, then clear Use Printer Offline. Probed 2026-08-21: title-verified. What that article does not carry is the model boundary — it is written for a product line, and 5158C002 is the scope applied here. Where a control label, terminal, indicator pattern or reset sequence differs on your unit, the manual for that exact model is the authority, not this page and not the article.
Exact questions
Common follow-ups
Does my Canon imageCLASS MF656Cdw clog if I don't print for a while?+
No — it is a colour laser printer, so it uses dry toner rather than liquid ink and does not clog or dry out from sitting unused, unlike an inkjet. That makes it a good choice for occasional but quality colour printing. If print is faded, check for low toner or a cartridge not seated; streaks or repeating marks point to a toner cartridge or the imaging drum. Laser troubleshooting is toner/drum, never nozzle-cleaning.
My printer says offline but it's clearly switched on.+
Print a configuration page from the printer's own control panel and check the IP address on it against the one your computer has stored. Home routers hand out addresses that change after a restart or power cut, and the computer keeps looking at the old one — that is the most common cause of this by a distance. Assigning the printer a fixed address in the router stops it happening again.
It prints from my phone but not my laptop.+
That narrows it to the laptop rather than the printer or the network. Clear the print queue, then check whether Use Printer Offline has been set — it latches on after a failure and never clears itself — and look for duplicate printer entries, since jobs sent to a stale copy just vanish.
Does this answer apply to every Canon model?+
No. It is scoped to 5158C002. Canon printer; PIXMA/MegaTank/MAXIFY/imageCLASS ink/toner systems and maintenance paths differ.
What should I record before troubleshooting offline or unavailable?+
Record the complete model identifier, exact message or indicator, software/firmware where visible, the operating stage and what still works.
Why is a factory reset not the first step?+
A reset can erase accounts, networks, maps, schedules or preferences without distinguishing offline, unavailable. The ordered checks preserve that evidence.
When should I stop and use qualified service?+
Do not factory-reset network settings until credentials and managed configuration are known.
Answer for the exact device and software version shown above.