Direct answer
For the LG B5 OLED TV, trigger, source, cable, refresh/HDR/VRR and built-in menu behavior identify the fault. First, record whether menus flicker and test a direct source at fixed standard format.
What this covers
- LG B5 OLED TV (OLED48/55/65/77/83B5*)
- 2025 LG TV; OLED/QNED panel, webOS release, HDMI bandwidth and Magic Remote vary by model and size.
- The specific fault this record addresses: screen flickers, flashes or goes black intermittently
What it does not cover
- ×The same symptom on a different LG product line, which has its own record and its own cited source
- ×An on-screen error code whose meaning has not been checked against this exact model's manual
- ×Live electrical, gas, sealed-system, internal battery-cell or structural repair — a technician boundary, not a self-service step
Differential
What actually causes this, and how to tell them apart
These are ordered by how often each one is the answer, not by how easy it is to try. The point of the middle column is that two causes producing the same headline symptom rarely produce the same detail — that detail is what tells you which one you have before you change anything.
- 1
The HDMI link is dropping and renegotiating
What separates it Brief full-screen blackouts of a second or so, on one source only, often during scene or resolution changes.
How to confirm That is the signature of a link dropping out. See hdmi-no-signal — cable bandwidth and port capability are the usual causes, particularly with variable refresh rate enabled.
- 2
Variable refresh rate is causing visible brightness fluctuation
What separates it Flicker in games specifically, worst in menus or loading screens where the frame rate swings wildly, and absent in video content.
How to confirm VRR changes the refresh rate continuously to match the frame rate, and on some panels that produces visible brightness variation, particularly at low frame rates. Turning VRR off for a test confirms it.
- 3
A dimmer switch or LED lighting in the room is interacting
What separates it Flicker that is actually in the room rather than the screen, or that changes when the room lights are switched.
How to confirm Switch the room lighting off entirely as a test — this is worth ruling out early because it costs nothing.
- 4
The panel or its driver board is failing
What separates it Flicker on every source including the menus, sometimes with lines or bands.
How to confirm Flicker present on the set's own menu screen is internal to the television. On an OLED this points at the panel driver rather than a backlight, since there is none.
- 5
Motion interpolation is producing artefacts read as flicker
What separates it Judder or stutter rather than true flicker, on film content specifically.
How to confirm Turn off motion smoothing and compare. This is a processing setting rather than a fault.
Before you touch a setting
Record this first — changing settings destroys the evidence
Every item below stops existing the moment a reset, re-pair or settings change is made. Written down first, they are what separates the causes above; recovered afterwards, they are guesswork.
- Whether the flicker appears on the set's own menu screen — if it does, no external source can be the cause.
- Whether it affects every input or only one.
- Whether it happens in games specifically, which points at variable refresh rate.
- Whether room lighting changes it.
Open the TV's own settings menu and watch for flicker there
ReversibleThe menu is generated internally, so flicker on it rules out every external source in one step.
Switch the room lighting off as a test
ReversibleCosts nothing and rules out dimmers and LED lighting interacting with the room or the camera-like response of the eye.
Turn variable refresh rate off and retest in the same game
ReversibleVRR causes visible brightness fluctuation on some panels, worst where frame rates swing widely.
Try a different HDMI cable and a different port
ReversibleA link dropping and renegotiating produces brief full-screen blackouts that read as flicker.
Arrange service for flicker present on the internal menu
ReversibleThat is internal to the set — backlight driver on an LED/LCD, panel driver on an OLED.
Model-specific
What is true of this model and not of its siblings
Generic advice for the product line fails here. Each item below is a property of this specific model family that changes which of the steps above apply to you.
- Model scope
- OLED48/55/65/77/83B5*. 2025 LG TV; OLED/QNED panel, webOS release, HDMI bandwidth and Magic Remote vary by model and size.
- Panel
- Standard OLED evo (no Tandem, no Micro Lens Array) with the Alpha 8 AI Processor Gen2 — LG's 2025 entry OLED, dimmer than the C5 and G5. Still self-emissive with perfect blacks and no backlight bloom, so picture faults are gradation/near-black or processing, not backlight clouding.
- Smart platform
- webOS 25 with the Magic Remote, so it shares the C5/G5 app store, update path (Settings › Support › Software Update) and AirPlay 2 / Miracast screen share.
- Gaming / HDMI
- Four HDMI 2.1 ports with 4K 120 Hz, VRR, ALLM, G-Sync and FreeSync across all four — but the panel maxes at 120 Hz, NOT the 144 Hz of the C5 or the 165 Hz of the G5. A PC that cannot select 144 Hz on a B5 is hitting the panel limit, not a fault.
- Symptom boundary
- This record covers LG B5 OLED TV when it screen flickers, flashes or goes black intermittently. A different symptom on the same hardware, or this symptom on a different LG product line, has its own record with its own causes and its own cited source.
Stop boundary
When this stops being a self-service repair
Continuing past any one of these costs more than the repair saves — in safety, in warranty, or in evidence a technician needs.
- !Unplug the set for flicker accompanied by a burning smell, buzzing from the rear panel, or visible bulging.
- !Anyone with photosensitive epilepsy should stop using a flickering display until it is repaired.
Evidence ledger
Sources behind this answer
Visible sources support the visible claims. Home Product Support records the publisher, the fact used and the review date; community reports can suggest an issue but do not become a published fact on their own.
Where the manufacturer's article stops. LG Support publishes this as "TV and home theater support". Official LG television manuals, webOS support, diagnostics and repair entry point. What that article does not carry is the model boundary — it is written for a product line, and OLED48/55/65/77/83B5* is the scope applied here. Where a control label, terminal, indicator pattern or reset sequence differs on your unit, the manual for that exact model is the authority, not this page and not the article.
Exact questions
Common follow-ups
Can the LG B5 do 144Hz for PC gaming?+
No. The B5 tops out at 120 Hz. All four of its HDMI ports are full 2.1 with VRR, ALLM, G-Sync and FreeSync at up to 4K 120 Hz, but 144 Hz and 165 Hz are reserved for the 2025 C5 and G5. A PC that only offers up to 120 Hz on a B5 is showing the panel's real limit.
Why is my B5 not as bright as a C5 or G5?+
That is expected — the B5 is LG's entry 2025 OLED with a standard evo panel and the Alpha 8 processor, without the Brightness Booster and Tandem/MLA panels of the higher models. It is the same perfect-black OLED, just a lower peak-brightness tier, so it is not a fault.
How do I tell whether the flicker is the TV or the source?+
Open the television's own settings menu and watch it there. That menu is generated inside the set and does not pass through any input, so if the flicker is still visible on it, no external device can be causing it — the problem is internal to the television.
My screen flickers only when gaming.+
Turn variable refresh rate off and try the same game again. VRR continuously changes the refresh rate to match the frame rate, and on many panels that produces visible brightness fluctuation — worst in menus and loading screens where the frame rate swings widely.
Does this answer apply to every LG model?+
No. It is scoped to OLED48/55/65/77/83B5*. 2025 LG TV; OLED/QNED panel, webOS release, HDMI bandwidth and Magic Remote vary by model and size.
What should I record before troubleshooting flicker or blackouts?+
Record the complete model identifier, exact message or indicator, software/firmware where visible, the operating stage and what still works.
Why is a factory reset not the first step?+
A reset can erase accounts, networks, maps, schedules or preferences without distinguishing flicker, blackouts. The ordered checks preserve that evidence.
When should I stop and use qualified service?+
Unplug for arcing, smoke, heat or a flicker that worsens with port movement.
Answer for the exact device and software version shown above.