Direct answer
For the PlayStation 5 Digital Edition slim, display input, cable, HDMI port, safe-resolution mode and console hardware should be isolated. First, connect directly to a known display with a certified cable.
What this covers
- PlayStation 5 Digital Edition slim (CFI-2000 series digital)
- PlayStation console; disc drive, storage, display bandwidth and system-software recovery vary by model.
- The specific fault this record addresses: turns on but has no picture
What it does not cover
- ×The same symptom on a different Sony PlayStation product line, which has its own record and its own cited source
- ×An on-screen error code whose meaning has not been checked against this exact model's manual
- ×Live electrical, gas, sealed-system, internal battery-cell or structural repair — a technician boundary, not a self-service step
Differential
What actually causes this, and how to tell them apart
These are ordered by how often each one is the answer, not by how easy it is to try. The point of the middle column is that two causes producing the same headline symptom rarely produce the same detail — that detail is what tells you which one you have before you change anything.
- 1
The television is on the wrong input, or its HDMI handshake did not complete
What separates it The console's light is on but the TV shows 'No Signal', and other inputs on the same TV work.
How to confirm Cycle the TV to the exact HDMI number the console is plugged into, then power-cycle both — many 'no picture' reports are simply the wrong input or a handshake that needs both devices restarted in order (TV first, then console).
- 2
The HDMI cable is failing or is not rated for the console's output
What separates it The picture is absent, or it flickers, sparkles or drops out intermittently, especially at higher resolutions.
How to confirm Swap in a different high-speed HDMI cable — ideally the one that shipped with the console — and test on a port that has just shown a picture from another source.
- 3
The console is set to a resolution or format the current display cannot show
What separates it It worked on one TV but shows nothing on a different or older one, or stopped after a display setting was changed.
How to confirm Boot into the console's low-resolution safe/startup video mode (each platform has one) and reset the output to a format the display supports before re-enabling higher modes.
- 4
An HDMI port is physically damaged on the console or the display
What separates it The signal appears only when the cable is held at an angle, or one specific port is dead while others work.
How to confirm Test the console on a second HDMI port and a second display; a signal that depends on cable position points to a bent or cracked port, which is a hardware repair.
Before you touch a setting
Record this first — changing settings destroys the evidence
Every item below stops existing the moment a reset, re-pair or settings change is made. Written down first, they are what separates the causes above; recovered afterwards, they are guesswork.
- Whether the console shows its power light, fan and startup chime — confirming it is the picture, not the console, that is missing.
- Whether the same TV input and cable show a picture from another source.
- Whether anything changed the video setup recently: a new TV, a new cable, or a resolution/HDR setting change.
Confirm the TV is on the exact HDMI input the console uses
ReversibleMatch the input number to the physical port and rule the TV's own input selection out first.
Power-cycle the display and console in order
ReversibleTurn the TV off and on, then the console, so the HDMI handshake renegotiates cleanly.
Swap to a known-good high-speed HDMI cable and a second port
ReversibleUse the console's supplied cable if available, on a port confirmed working from another source.
If still blank, use the platform's safe/low-resolution video mode to reset output
ReversibleThis recovers a console stuck on a format the current display cannot accept.
Model-specific
What is true of this model and not of its siblings
Generic advice for the product line fails here. Each item below is a property of this specific model family that changes which of the steps above apply to you.
- Model scope
- CFI-2000 series digital. PlayStation console; disc drive, storage, display bandwidth and system-software recovery vary by model.
- Model — PS5 Slim Digital (CFI-2000)
- The 2023 Digital Edition — no disc drive, download-only, around 1TB SSD. Disc symptoms do not apply unless you add the drive.
- Drive can be added
- Unlike the original launch Digital Edition, the Slim Digital CAN accept the same detachable Ultra HD Blu-ray Disc Drive sold separately — so if you want discs, this model supports adding the drive later.
- Storage & network
- ~1TB internal SSD plus an M.2 NVMe expansion slot; Wi-Fi 6 and Gigabit Ethernet — wired is most reliable for downloads and online play.
- Symptom boundary
- This record covers Sony PlayStation PlayStation 5 Digital Edition slim when it turns on but has no picture. A different symptom on the same hardware, or this symptom on a different Sony PlayStation product line, has its own record with its own causes and its own cited source.
Stop boundary
When this stops being a self-service repair
Continuing past any one of these costs more than the repair saves — in safety, in warranty, or in evidence a technician needs.
- !Stop and arrange service for a physically loose or hot HDMI port, bent pins, or a signal that only appears when the cable is held at an angle.
Evidence ledger
Sources behind this answer
Visible sources support the visible claims. Home Product Support records the publisher, the fact used and the review date; community reports can suggest an issue but do not become a published fact on their own.
Where the manufacturer's article stops. PlayStation Support publishes this as "PlayStation support". Official PlayStation console, controller, storage, display, network and account support. What that article does not carry is the model boundary — it is written for a product line, and CFI-2000 series digital is the scope applied here. Where a control label, terminal, indicator pattern or reset sequence differs on your unit, the manual for that exact model is the authority, not this page and not the article.
Exact questions
Common follow-ups
Can I add a disc drive to my PS5 Slim Digital Edition?+
Yes — the Slim Digital Edition accepts the detachable Ultra HD Blu-ray Disc Drive that Sony sells separately; clip it on and the console reads discs. This is a difference from the original launch Digital Edition, which cannot take the drive. Out of the box the Slim Digital is download-only, so disc troubleshooting only applies once you have added the drive.
The console light is on but my TV says 'No Signal'.+
The console is running; only the picture is missing. Confirm the TV is on the exact HDMI input the console is plugged into, then turn the TV off and on and restart the console so the HDMI handshake renegotiates. If that fails, swap the HDMI cable and try a second port before assuming a hardware fault.
It worked on my old TV but shows nothing on the new one.+
The console is likely outputting a resolution or HDR format the new display is rejecting. Boot into the platform's safe or low-resolution startup video mode and set the output back to a format the TV supports, then re-enable 4K, HDR or 120 Hz one at a time to find which one the display cannot accept.
Does this answer apply to every Sony PlayStation model?+
No. It is scoped to CFI-2000 series digital. PlayStation console; disc drive, storage, display bandwidth and system-software recovery vary by model.
What should I record before troubleshooting no display or HDMI?+
Record the complete model identifier, exact message or indicator, software/firmware where visible, the operating stage and what still works.
Why is a factory reset not the first step?+
A reset can erase accounts, networks, maps, schedules or preferences without distinguishing no display, HDMI. The ordered checks preserve that evidence.
When should I stop and use qualified service?+
Stop for hot ports, bent connectors, sparks or movement-sensitive signal.
Answer for the exact device and software version shown above.