Direct answer
For the Sony BRAVIA 2 II LED TV, built-in menus versus every external input separates panel/backlight faults from HDMI/source problems. First, display the TV menu and a built-in app in a dark room.
What this covers
- Sony BRAVIA 2 II LED TV (K-43/50/55/65/75S20M2)
- 2025 Sony BRAVIA; Google TV release, panel, processor and HDMI 2.1 port allocation vary by size/model.
- The specific fault this record addresses: has sound but no picture
What it does not cover
- ×The same symptom on a different Sony product line, which has its own record and its own cited source
- ×An on-screen error code whose meaning has not been checked against this exact model's manual
- ×Live electrical, gas, sealed-system, internal battery-cell or structural repair — a technician boundary, not a self-service step
Differential
What actually causes this, and how to tell them apart
These are ordered by how often each one is the answer, not by how easy it is to try. The point of the middle column is that two causes producing the same headline symptom rarely produce the same detail — that detail is what tells you which one you have before you change anything.
- 1
The LED backlight has failed
What separates it Sound is normal and the screen looks black, but shining a torch closely at the dark screen at an angle reveals a faint image still being rendered underneath.
How to confirm That flashlight test is close to definitive on an LED/LCD set. The panel is still producing the image; nothing is lighting it. Backlight LED strips or their driver are the usual failure, and it is a service repair rather than a setting.
- 2
The set is on the wrong input
What separates it A black screen with sound coming from a different source than expected, or no picture after another device was connected.
How to confirm Cycle every input deliberately rather than relying on auto-detect, which frequently lands on an empty port.
- 3
The picture has been turned off deliberately
What separates it Sound continues normally and the screen is black, with no fault at all. Several sets have a picture-off, screen-off or audio-only mode intended for listening to music.
How to confirm Check the manual for this model's picture-off mode and how to exit it. It is easy to select by accident from a remote shortcut, and it presents exactly as a dead panel.
- 4
The source device is outputting a resolution or format the set cannot display
What separates it One source is black while others are fine, often after a console or player was set to a new resolution or HDR mode.
How to confirm See hdmi-no-signal. A set that cannot handle the incoming format may pass audio while showing nothing.
Before you touch a setting
Record this first — changing settings destroys the evidence
Every item below stops existing the moment a reset, re-pair or settings change is made. Written down first, they are what separates the causes above; recovered afterwards, they are guesswork.
- Whether a torch held close to the dark screen reveals a faint image underneath — on an LED/LCD set this single test identifies a backlight failure.
- Whether pressing a menu button produces a visible on-screen menu, which proves the panel can still display something.
- Whether the problem affects every input or only one.
- Whether any picture-off or audio-only mode has been enabled.
Press a menu button and look for an on-screen menu
ReversibleA visible menu proves the panel and its driver work, which moves the problem to the input or source rather than the display.
Shine a torch close to the dark screen at an angle and look for a faint image
ReversibleA faint visible image with no light behind it is a backlight failure and is close to definitive on an LED/LCD set.
Cycle through every input deliberately
ReversibleAuto-detect frequently settles on an empty port and presents as a dead screen.
Check for a picture-off or audio-only mode and exit it
ReversibleSeveral sets have one, it is easy to trigger from a remote shortcut, and it looks exactly like a failed panel.
Arrange service for a confirmed backlight or panel fault
ReversibleNeither is a user-serviceable repair, and on a large set the panel cost can approach replacement cost — worth a quote before authorising.
Model-specific
What is true of this model and not of its siblings
Generic advice for the product line fails here. Each item below is a property of this specific model family that changes which of the steps above apply to you.
- Model scope
- K-43/50/55/65/75S20M2. 2025 Sony BRAVIA; Google TV release, panel, processor and HDMI 2.1 port allocation vary by size/model.
- Panel — entry LED LCD
- 2025 entry LED LCD with the 4K Processor X1 (NOT the Cognitive Processor XR of the higher models) and no local dimming — the value tier. Blacks are grey in a dark room and backlight uniformity is more visible; that is the limit of the tier, not a defect.
- Smart platform
- Google TV. Update at Settings › System › About › System software update; Chromecast built-in and AirPlay 2 — the same platform as the flagship BRAVIA sets, so the app and cast experience is full even though the panel is entry-level.
- Refresh — native 60Hz, no VRR
- The decisive limit: the BRAVIA 2 II is a native 60 Hz panel (its Motionflow XR 240 figure is interpolation, not a true refresh rate) without HDMI 2.1, 4K 120 Hz or VRR. A request for 120 Hz or VRR is a hardware limitation, not a setting or a fault. It still supports Dolby Vision.
- Symptom boundary
- This record covers Sony BRAVIA 2 II LED TV when it has sound but no picture. A different symptom on the same hardware, or this symptom on a different Sony product line, has its own record with its own causes and its own cited source.
Stop boundary
When this stops being a self-service repair
Continuing past any one of these costs more than the repair saves — in safety, in warranty, or in evidence a technician needs.
- !Unplug the set for a burning smell, smoke, or visible damage or bulging at the rear panel.
- !Do not disassemble a television to inspect a backlight — the panel is fragile, and large sets carry stored charge in the power supply.
Evidence ledger
Sources behind this answer
Visible sources support the visible claims. Home Product Support records the publisher, the fact used and the review date; community reports can suggest an issue but do not become a published fact on their own.
Where the manufacturer's article stops. Sony Support publishes this as "Television and computer support". Official Sony and BRAVIA manuals, firmware and troubleshooting support. What that article does not carry is the model boundary — it is written for a product line, and K-43/50/55/65/75S20M2 is the scope applied here. Where a control label, terminal, indicator pattern or reset sequence differs on your unit, the manual for that exact model is the authority, not this page and not the article.
Exact questions
Common follow-ups
Why can't I get 120Hz or VRR on my Sony BRAVIA 2 II?+
The BRAVIA 2 II is an entry 60 Hz LED TV without HDMI 2.1, so it does not have 4K 120 Hz or VRR — no setting enables them because the hardware lacks them. The 'Motionflow XR 240' figure is motion interpolation, not a real 240 Hz panel. For high-refresh gaming you would need a Sony BRAVIA 5/7/9 or an OLED. It does still support Dolby Vision for HDR.
I have sound but the screen is completely black.+
Try the flashlight test: with the set on and sound playing, shine a torch close to the screen at an angle and look for a very faint image. If you can see one, the panel is still working and the backlight behind it has failed — that is a service repair rather than a setting. Before that, press a menu button; a visible menu proves the display works and moves the problem to the input.
Could this just be a setting?+
It can be. Several televisions have a picture-off, screen-off or audio-only mode meant for listening to music, and it can be selected accidentally from a remote shortcut. It looks exactly like a dead panel. Check the manual for this model's version before assuming hardware.
Does this answer apply to every Sony model?+
No. It is scoped to K-43/50/55/65/75S20M2. 2025 Sony BRAVIA; Google TV release, panel, processor and HDMI 2.1 port allocation vary by size/model.
What should I record before troubleshooting no picture or black screen?+
Record the complete model identifier, exact message or indicator, software/firmware where visible, the operating stage and what still works.
Why is a factory reset not the first step?+
A reset can erase accounts, networks, maps, schedules or preferences without distinguishing no picture, black screen. The ordered checks preserve that evidence.
When should I stop and use qualified service?+
Unplug for smoke, arcing, a cracked panel or heat.
Answer for the exact device and software version shown above.